Previous Next

Total Videos: 392

  1. Jam Chuck for Reversing a Turned bowl 1. Video
    Jam Chuck for Reversing a Turned bowl

  2. BIG Walnut Bowl 2. Video
    BIG Walnut Bowl

  3. Fundamentals of Hand Chased Threads by Sam Angelo 3. Video
    Fundamentals of Hand Chased Threads by Sam Angelo

  4. Hollow Form Basics: Part 2 ~~ Hollowing the inside    Sam Angelo Wyomingwoodturner 4. Video
    Hollow Form Basics: Part 2 ~~ Hollowing the inside Sam Angelo Wyomingwoodturner

  5. Hollow Form Basics: Part 1  ~Shaping  the outside~  Sam Angelo Wyomingwoodturner 5. Video
    Hollow Form Basics: Part 1 ~Shaping the outside~ Sam Angelo Wyomingwoodturner

  6. \ 6. Video
    "Bee Hive" Beads of Courage Box Sam Angelo wyomingwoodturner

  7. Sharpening a Box Scraper  Sam Angelo the Wyomingwoodturner 7. Video
    Sharpening a Box Scraper Sam Angelo the Wyomingwoodturner

  8. Castle Box..... by Sam Angelo  the Wyomingwoodturner 8. Video
    Castle Box..... by Sam Angelo the Wyomingwoodturner

  9. Completing a Rough-turned Bowl: (From log to bowl series) PART 4 Sam Angelo 9. Video
    Completing a Rough-turned Bowl: (From log to bowl series) PART 4 Sam Angelo

  10. Woodturners Workbench:  PART 1 Milling and Design  Top  Sam Angelo 10. Video
    Woodturners Workbench: PART 1 Milling and Design Top Sam Angelo

  11. Tool Sharpening Set-up on the Wood Lathe 11. Video
    Tool Sharpening Set-up on the Wood Lathe

  12. Woodturner\'s Workbench -PART 2  Gluing the Top Sam Angelo  Wyomingwoodturner 12. Video
    Woodturner's Workbench -PART 2 Gluing the Top Sam Angelo Wyomingwoodturner

  13. Woodturner\'s Workbench; Part 4 Assembling the Shoulder Vice Sam Angelo Wyomingwoodturner 13. Video
    Woodturner's Workbench; Part 4 Assembling the Shoulder Vice Sam Angelo Wyomingwoodturner

  14. Notes from the Wyomingwoodturner February 2019  Sam Angelo 14. Video
    Notes from the Wyomingwoodturner February 2019 Sam Angelo

  15. Woodturner\'s Workbench: Part 5   Assembling the Base   Sam Angelo Wyomingwoodturner 15. Video
    Woodturner's Workbench: Part 5 Assembling the Base Sam Angelo Wyomingwoodturner

  16. Woodturner\'s Workbench: Introduction... Sam Angelo Wyomingwoodturner 16. Video
    Woodturner's Workbench: Introduction... Sam Angelo Wyomingwoodturner

  17. Record Power Contest Promo: Pics Into Prizes 2019 by Sam Angelo 17. Video
    Record Power Contest Promo: Pics Into Prizes 2019 by Sam Angelo

  18. WOODTURNERS WORKBENCH:  Part 3 DOVETAILING the Corners  Sam Angelo the  Wyomingwoodturner 18. Video
    WOODTURNERS WORKBENCH: Part 3 DOVETAILING the Corners Sam Angelo the Wyomingwoodturner

  19. CALABASH BOWL:  Woodturning with Sam Angelo  the WyomingWoodturner 19. Video
    CALABASH BOWL: Woodturning with Sam Angelo the WyomingWoodturner

  20. Pen Turning on the Cheap   Sam Angelo the Wyomingwoodturning 20. Video
    Pen Turning on the Cheap Sam Angelo the Wyomingwoodturning

  21. Wagner Texturing tool Review 21. Video
    Wagner Texturing tool Review

  22. NOTES from the Wyomingwoodturner January 2019    Sam Angelo 22. Video
    NOTES from the Wyomingwoodturner January 2019 Sam Angelo

  23. Oneway 1224 wood lathe unboxing and review 23. Playlist
    Oneway 1224 wood lathe unboxing and review

  24. Getting Ready for The Utah Woodturning Symposium   2015 24. Video
    Getting Ready for The Utah Woodturning Symposium 2015

  25. Completing a Rough-Turned Lidded Box:   (2)     Woodturning with Sam Angelo 25. Video
    Completing a Rough-Turned Lidded Box: (2) Woodturning with Sam Angelo

  26. THREAD CHASING: FEMALE THREADS-UPDATED 26. Video
    THREAD CHASING: FEMALE THREADS-UPDATED

  27. Monster Wall Hanger: Russian Olive Burl-- Part 3   by Sam Angelo 27. Video
    Monster Wall Hanger: Russian Olive Burl-- Part 3 by Sam Angelo

  28. Tool and Lathe Accessory reviews 28. Playlist
    Tool and Lathe Accessory reviews

  29. Pen Turning 29. Playlist
    Pen Turning

  30. Making an Enjoyable Video: woodturning with Sam Angelo 30. Video
    Making an Enjoyable Video: woodturning with Sam Angelo

  31. How to search a YouTube channel for Woodturning videos 31. Video
    How to search a YouTube channel for Woodturning videos

  32. Turners Laser Guide (review by Sam Angelo): Ron Brown\'s Best 32. Video
    Turners Laser Guide (review by Sam Angelo): Ron Brown's Best

  33. Sam\'s Shop Tour December  2018 ~Sam Angelo  wyomingwoodturner 33. Video
    Sam's Shop Tour December 2018 ~Sam Angelo wyomingwoodturner

  34. From Nature to Culture   Woodturning with  Sam Angelo 34. Video
    From Nature to Culture Woodturning with Sam Angelo

  35. Tamarind Bowl   Sam Angelo wyomingwoodturner 35. Video
    Tamarind Bowl Sam Angelo wyomingwoodturner

  36. Turning Projects with NO bushings and NO mandrel-(Pens) Sam Angelo wyomingwoodturner 36. Video
    Turning Projects with NO bushings and NO mandrel-(Pens) Sam Angelo wyomingwoodturner

  37. Milling a Bowl blank on the Bandsaw:   woodturning with Sam Angelo 37. Video
    Milling a Bowl blank on the Bandsaw: woodturning with Sam Angelo

  38. Safety Shield for a Wood Lathe with Sam Angelo 38. Video
    Safety Shield for a Wood Lathe with Sam Angelo

  39. Notes from the Wyomingwoodturner-- November  2018  Sam Angelo 39. Video
    Notes from the Wyomingwoodturner-- November 2018 Sam Angelo

  40. Large Beads of Courage Container: the Base- Sam Angelo wyomingwoodturner 40. Video
    Large Beads of Courage Container: the Base- Sam Angelo wyomingwoodturner

  41. Lid for Large Beads of Courage Container Sam Angelo wyomingwoodturner 41. Video
    Lid for Large Beads of Courage Container Sam Angelo wyomingwoodturner

  42. Coloring a Box Elder Hollow Form  with Sam Angelo 42. Video
    Coloring a Box Elder Hollow Form with Sam Angelo

  43. Display stand for lathe turned art 43. Video
    Display stand for lathe turned art

  44. Dealing with Dust in the Workshop 44. Video
    Dealing with Dust in the Workshop

  45. Natural Edge Bowl Part 2 :    Turning the INSIDE 45. Video
    Natural Edge Bowl Part 2 : Turning the INSIDE

  46. THREAD CHASING IN WOOD:  TOOLS OF THE TRADE 46. Video
    THREAD CHASING IN WOOD: TOOLS OF THE TRADE

  47. WOODTURNING--- \ 47. Video
    WOODTURNING--- "Invent your own Wheel"

  48. Beads of Courage Box by Sam Angelo 48. Video
    Beads of Courage Box by Sam Angelo

  49. Woodturning Safety for the Lathe 49. Playlist
    Woodturning Safety for the Lathe

  50. SCRAPING on a bowl: woodturning practice 50. Video
    SCRAPING on a bowl: woodturning practice

  51. Coloring Markers for the Wood Lathe:    Woodturning with Sam 51. Video
    Coloring Markers for the Wood Lathe: Woodturning with Sam

  52. SPINDLE ROUGHING GOUGE PRACTICE:woodturning 52. Video
    SPINDLE ROUGHING GOUGE PRACTICE:woodturning

  53. FUNdamentals of Woodturning: Sharpen a Scraper 53. Video
    FUNdamentals of Woodturning: Sharpen a Scraper

  54. Rough Turning a Lidded Box:   woodturning 54. Video
    Rough Turning a Lidded Box: woodturning

  55. Cheryle practices for her Leaf Project:   woodturning with Sam Angelo 55. Video
    Cheryle practices for her Leaf Project: woodturning with Sam Angelo

  56. Safety First On the Lathe---Part 2  (2015) 56. Video
    Safety First On the Lathe---Part 2 (2015)

  57. NATURAL EDGE BOWL: part 2 57. Video
    NATURAL EDGE BOWL: part 2

  58. Snowman Ornament: 2014 Festival of Trees-Worland, Wy 58. Video
    Snowman Ornament: 2014 Festival of Trees-Worland, Wy

  59. Your Questions, My Comments Sam Angelo woodturning 59. Video
    Your Questions, My Comments Sam Angelo woodturning

  60. Woodturning Questions answered by Sam Angelo 60. Video
    Woodturning Questions answered by Sam Angelo

  61. The Ultimate Guide to the Parting Tool: Woodturning with Sam Angelo 61. Video
    The Ultimate Guide to the Parting Tool: Woodturning with Sam Angelo

  62. Teaching A young Woodturner  with Sam angelo 62. Video
    Teaching A young Woodturner with Sam angelo

  63. Practicing with a Spindle gouge:  Woodturning with Sam Angelo 63. Video
    Practicing with a Spindle gouge: Woodturning with Sam Angelo

  64. Shop made Buffing System for Woodturning  with Sam Angelo 64. Video
    Shop made Buffing System for Woodturning with Sam Angelo

  65. BAND SAW Blade  DRIFT 65. Video
    BAND SAW Blade DRIFT

  66. Tung Oil Simplified-woodturning 66. Video
    Tung Oil Simplified-woodturning

  67. Pen made  from WOOD and Resin 67. Video
    Pen made from WOOD and Resin

  68. SPINNING TOP: WITH A BUILT IN SURPRISE 68. Video
    SPINNING TOP: WITH A BUILT IN SURPRISE

  69. Cabachons and Conchos:  Inlays for woodurning 69. Video
    Cabachons and Conchos: Inlays for woodurning

  70. Turning a Tool Handle for a  TURNING Tool 2 of 2 70. Video
    Turning a Tool Handle for a TURNING Tool 2 of 2

  71. Milling Box Elder Burl 71. Video
    Milling Box Elder Burl

  72. Sanding a Brass Pen Tube  with Sam Angelo 72. Video
    Sanding a Brass Pen Tube with Sam Angelo

  73. Spin Top with a Ball Bearing Tip by Sam Angelo 73. Video
    Spin Top with a Ball Bearing Tip by Sam Angelo

  74. Executive Desk Top  (part 2)  by Sam Angelo 74. Video
    Executive Desk Top (part 2) by Sam Angelo

  75. WET SANDING A PEN with CA Glue 75. Video
    WET SANDING A PEN with CA Glue

  76. Part 2 of 5, HOLLOWING TOOLS: Woodturning 76. Video
    Part 2 of 5, HOLLOWING TOOLS: Woodturning

  77. Coloring a Hollow Form: Woodturning with Sam Angelo 77. Video
    Coloring a Hollow Form: Woodturning with Sam Angelo

  78. Turned Box with Threaded Lid and Finial part 1 78. Video
    Turned Box with Threaded Lid and Finial part 1

  79. Part 1 of 5, Hollow form Design:Woodturning 79. Video
    Part 1 of 5, Hollow form Design:Woodturning

  80. SPINDLE LOCK add-on for  P-Matic 3520B Lathe 80. Video
    SPINDLE LOCK add-on for P-Matic 3520B Lathe

  81. Coloring Technique for Woodturning 81. Video
    Coloring Technique for Woodturning

  82. Turned Box with Threaded Lid and Finial part 2 82. Video
    Turned Box with Threaded Lid and Finial part 2

  83. Carve, Burn, Color 83. Video
    Carve, Burn, Color

  84. Thread Chasing LEFT HAND Threads in wood 84. Video
    Thread Chasing LEFT HAND Threads in wood

  85. Thread Chasing and the Point Tool 85. Video
    Thread Chasing and the Point Tool

  86. 2015 RMWT Symposium -- Working on Design of lidded boxes 86. Video
    2015 RMWT Symposium -- Working on Design of lidded boxes

  87. Threaded Finial and Nut:  Part 1 (woodturning) 87. Video
    Threaded Finial and Nut: Part 1 (woodturning)

  88. FOOD-SAFE Finish for the Kitchen 88. Video
    FOOD-SAFE Finish for the Kitchen

  89. Crushing Turquoise---a better way 89. Video
    Crushing Turquoise---a better way

  90. PART 2 APPLYING A CA FINISH TO AN IRONWOOD PEN BLANK.wmv 90. Video
    PART 2 APPLYING A CA FINISH TO AN IRONWOOD PEN BLANK.wmv

  91. Monster Wall Hanger: Russian Olive Burl-- Part 2 by Sam Angelo 91. Video
    Monster Wall Hanger: Russian Olive Burl-- Part 2 by Sam Angelo

  92. Turned Spatula: the Sequel \ 92. Video
    Turned Spatula: the Sequel "Sanding at the drill press"

  93. Wood turned Art-preparing the canvas (part 1) 93. Video
    Wood turned Art-preparing the canvas (part 1)

  94. Part 2: Milling and shaping a Madrone Burl 94. Video
    Part 2: Milling and shaping a Madrone Burl

  95. Current Art Work  April 2018  Sam Angelo woodturning 95. Video
    Current Art Work April 2018 Sam Angelo woodturning

  96. Dealing with Blushing Lacquer 96. Video
    Dealing with Blushing Lacquer

  97. TURQUOISE PROCESSING Stone  for Inlay work 97. Video
    TURQUOISE PROCESSING Stone for Inlay work

  98. Between a Scrape and a Cut: the \ 98. Video
    Between a Scrape and a Cut: the " No Man's Land" of Woodturning

  99. Mixing Beeswax and Mineral oil safely,   by Sam Angelo 99. Video
    Mixing Beeswax and Mineral oil safely, by Sam Angelo

  100. C.A. Technologies Pressure Pot for Casting with Sam Angelo 100. Video
    C.A. Technologies Pressure Pot for Casting with Sam Angelo

  101. Wax as a Finish on Wood-turned Art 101. Video
    Wax as a Finish on Wood-turned Art

  102. Photographing Artwork: Lighting & Backdrop Part I with Sam Angelo 102. Video
    Photographing Artwork: Lighting & Backdrop Part I with Sam Angelo

  103. PEN MAKING TIP:  BARREL TRIMMING on the Drill Press 103. Video
    PEN MAKING TIP: BARREL TRIMMING on the Drill Press

  104. Photographing Artwork:    the  Camera part II  with Sam Angelo 104. Video
    Photographing Artwork: the Camera part II with Sam Angelo

  105. 7163 3M Full Face Respirator:   Review  by Sam angelo 105. Video
    7163 3M Full Face Respirator: Review by Sam angelo

  106. Thread Chasing by Sam Angelo 106. Playlist
    Thread Chasing by Sam Angelo

  107. TURNING More Manzanita 107. Video
    TURNING More Manzanita

  108. Mushroom box made from a Banksia seed Pod 108. Video
    Mushroom box made from a Banksia seed Pod

  109. TURNING A BOTTLE STOPPER with a PIN CHUCK 109. Video
    TURNING A BOTTLE STOPPER with a PIN CHUCK

  110. Rough Turning a Platter (part 1) 110. Video
    Rough Turning a Platter (part 1)

  111. Cross Over tools: 1-Gouges 2 Parting tools 3- scrappers 4- Skew chisels 111. Playlist
    Cross Over tools: 1-Gouges 2 Parting tools 3- scrappers 4- Skew chisels

  112. Quick Tip Tuesday Videos 112. Playlist
    Quick Tip Tuesday Videos

  113. Texturing Wood (Robert Sorby texturing tool) 113. Video
    Texturing Wood (Robert Sorby texturing tool)

  114. \ 114. Video
    "Magic Hammer"----Thread Chasing with Sam Angelo

  115. #1 Hunter Tapered Shoulder Tool: review by Sam Angelo 115. Video
    #1 Hunter Tapered Shoulder Tool: review by Sam Angelo

  116. FUNdamentals of woodturning: #4-- Specialty Tools 116. Video
    FUNdamentals of woodturning: #4-- Specialty Tools

  117. TURNED ACRYLIC BOX:  PART 2  (woodturning) 117. Video
    TURNED ACRYLIC BOX: PART 2 (woodturning)

  118. Completing a Rough-Turned Lidded Box:  (1)    Woodturning with Sam angelo 118. Video
    Completing a Rough-Turned Lidded Box: (1) Woodturning with Sam angelo

  119. Woodturning a Bowl with a Scraper 119. Video
    Woodturning a Bowl with a Scraper

  120. Completing a Rough Turned Hollow Form ....with Sam Angelo 120. Video
    Completing a Rough Turned Hollow Form ....with Sam Angelo

  121. FUNdamentals of Woodturning: Basic Woodturning Tools   #3 part 2 121. Video
    FUNdamentals of Woodturning: Basic Woodturning Tools #3 part 2

  122. HOW TO GET STARTED IN WOODTURNING 122. Video
    HOW TO GET STARTED IN WOODTURNING

  123. Turning 4 Platters Part I 123. Video
    Turning 4 Platters Part I

  124. Crazy Burl Bowl Conundrum 124. Video
    Crazy Burl Bowl Conundrum

  125. Cross Over Tools,   the Gouges:    woodturning with Sam Angelo 125. Video
    Cross Over Tools, the Gouges: woodturning with Sam Angelo

  126. Hollowing TOOL Review:woodturning with Sam 126. Video
    Hollowing TOOL Review:woodturning with Sam

  127. Adding a Lid to a Hollow Form: Woodturning 127. Video
    Adding a Lid to a Hollow Form: Woodturning

  128. Sphere Box: Woodturning 128. Video
    Sphere Box: Woodturning

  129. Executive Desk Top  (part 1)  by Sam Angelo 129. Video
    Executive Desk Top (part 1) by Sam Angelo

  130. Coring Natural edge bowls: part 3 130. Video
    Coring Natural edge bowls: part 3

  131. WOOD TURNING: A BOWL FROM  A LOG 131. Video
    WOOD TURNING: A BOWL FROM A LOG

  132. Monster Wall Hanger:  32 Inch -  Russian Olive Burl part 1 132. Video
    Monster Wall Hanger: 32 Inch - Russian Olive Burl part 1

  133. Oneway 1224 add-on for my Light;     Woodturning by Sam Angelo 133. Video
    Oneway 1224 add-on for my Light; Woodturning by Sam Angelo

  134. What\'s in your First Aid Kit?:  Quick tip Tuesday On Shop Safety  Sam Angelo 134. Video
    What's in your First Aid Kit?: Quick tip Tuesday On Shop Safety Sam Angelo

  135. Carver\'s Mallet: Turning The Shape   (part 2) 135. Video
    Carver's Mallet: Turning The Shape (part 2)

  136. KILN FOR DRYING WOOD:WOODTURNING 136. Video
    KILN FOR DRYING WOOD:WOODTURNING

  137. Finishing a Natural edge Bowl: part 4 137. Video
    Finishing a Natural edge Bowl: part 4

  138. WOODTURNING:  Mounting wood on the lathe (2 OF 2) 138. Video
    WOODTURNING: Mounting wood on the lathe (2 OF 2)

  139. Changing my shop layout (for lathes) Sam Angelo 139. Video
    Changing my shop layout (for lathes) Sam Angelo

  140. Turning a Chair Bodger\'s Beetle  with Sam Angelo 140. Video
    Turning a Chair Bodger's Beetle with Sam Angelo

  141. FINDING the  Center of a Turning Blank (woodturning) 141. Video
    FINDING the Center of a Turning Blank (woodturning)

  142. Part 1: Madrone Bowl Blank project -analyzing the wood 142. Video
    Part 1: Madrone Bowl Blank project -analyzing the wood

  143. Wipe-On Oil finish---- on a Hollow form by Sam Angelo 143. Video
    Wipe-On Oil finish---- on a Hollow form by Sam Angelo

  144. Teaching aids for Thread Chasing: woodturning 144. Video
    Teaching aids for Thread Chasing: woodturning

  145. Lidded Walnut Box  Woodturing with Sam Angelo 145. Video
    Lidded Walnut Box Woodturing with Sam Angelo

  146. A Perfect Level Surface for Your Turning Project: FUNdamentals #8 146. Video
    A Perfect Level Surface for Your Turning Project: FUNdamentals #8

  147. Making and Using a Friction drive: Woodturning 147. Video
    Making and Using a Friction drive: Woodturning

  148. Natural Edge Bowl Part 1 :    Turning the outside 148. Video
    Natural Edge Bowl Part 1 : Turning the outside

  149. Part 3 of 5,  Hollowing Tools: Woodturning 149. Video
    Part 3 of 5, Hollowing Tools: Woodturning

  150. Sanding on the drill press:   FUNdamentals of Woodturning 150. Video
    Sanding on the drill press: FUNdamentals of Woodturning

  151. Black Palm no-spigot, lidded  box/woodturning 151. Video
    Black Palm no-spigot, lidded box/woodturning

  152. Natural Edge Bowl Part 1 OF 4 152. Video
    Natural Edge Bowl Part 1 OF 4

  153. THREAD CHASING,   PRACTICE MATERIALS 153. Video
    THREAD CHASING, PRACTICE MATERIALS

  154. Spraying (Lacquer) tips for Woodturners: Finex 1000 154. Video
    Spraying (Lacquer) tips for Woodturners: Finex 1000

  155. Off Center Lidded Box (Using double-stick tape for a chuck)  Sam Angelo 155. Video
    Off Center Lidded Box (Using double-stick tape for a chuck) Sam Angelo

  156. THREAD CHASING: MATING FEMALE  AND MALE THREADS WMV.wmv 156. Video
    THREAD CHASING: MATING FEMALE AND MALE THREADS WMV.wmv

  157. FUNdamentals of Woodturning: #5 Make a screw Chuck 157. Video
    FUNdamentals of Woodturning: #5 Make a screw Chuck

  158. Another approach to applying CA glue to a Pen 158. Video
    Another approach to applying CA glue to a Pen

  159. Kids and Woodturning 159. Playlist
    Kids and Woodturning

  160. FUNdamentals of Woodturning 160. Playlist
    FUNdamentals of Woodturning

  161. Christmas ornaments 161. Playlist
    Christmas ornaments

  162. Lidded/turned wooden boxes 162. Playlist
    Lidded/turned wooden boxes

  163. Spindle Turning Safety for the Wood Lathe 163. Video
    Spindle Turning Safety for the Wood Lathe

  164. TURNING A (WET) WOOD BOWL ON THE LATHE:  PART 1, (OUTSIDE OF BOWL) 164. Video
    TURNING A (WET) WOOD BOWL ON THE LATHE: PART 1, (OUTSIDE OF BOWL)

  165. Threaded Box: A step-by-step process/woodturning 165. Video
    Threaded Box: A step-by-step process/woodturning

  166. Threading a Finial insert: Woodturning 166. Video
    Threading a Finial insert: Woodturning

  167. Easter Eggs in Wood: Textured and Colored... by Sam Angelo 167. Video
    Easter Eggs in Wood: Textured and Colored... by Sam Angelo

  168. CROSSING OVER TO THE SCRAPER  woodturning with Sam Angelo 168. Video
    CROSSING OVER TO THE SCRAPER woodturning with Sam Angelo

  169. WOODTURNING:  Mounting wood on the lathe  (1 OF 2) 169. Video
    WOODTURNING: Mounting wood on the lathe (1 OF 2)

  170. Turning Wood Into Metal----with texture and gilt cream 170. Video
    Turning Wood Into Metal----with texture and gilt cream

  171. Crossing Over  with the Skew Chisel:  Woodturning by Sam Angelo 171. Video
    Crossing Over with the Skew Chisel: Woodturning by Sam Angelo

  172. WOODWORKING SHOP TOUR 172. Video
    WOODWORKING SHOP TOUR

  173. Inlay for a Lidded box:  Woodturning 173. Video
    Inlay for a Lidded box: Woodturning

  174. FUNdamentals of woodturning: #3 Tool Identification 174. Video
    FUNdamentals of woodturning: #3 Tool Identification

  175. Turning a Tool Handle for a Turning Tool 1 of 2 175. Video
    Turning a Tool Handle for a Turning Tool 1 of 2

  176. Amazing Doughnut Chuck review by Sam Angelo 176. Video
    Amazing Doughnut Chuck review by Sam Angelo

  177. Worst video EVER:  DON\'T BOTHER WATCHING THIS 177. Video
    Worst video EVER: DON'T BOTHER WATCHING THIS

  178. TURNED ACRYLIC BOX:  PART 1  (woodturning) 178. Video
    TURNED ACRYLIC BOX: PART 1 (woodturning)

  179. TURNING A TABLE LEG with Sam Angelo 179. Video
    TURNING A TABLE LEG with Sam Angelo

  180. small HOLLOW FORM: Woodturning 180. Video
    small HOLLOW FORM: Woodturning

  181. Light bulb kiln for Drying Wood: (update) woodturning with Sam Angelo 181. Video
    Light bulb kiln for Drying Wood: (update) woodturning with Sam Angelo

  182. How Wood Dries 182. Video
    How Wood Dries

  183. WoodTurning on the Lathe:  Spindle Gouge 183. Video
    WoodTurning on the Lathe: Spindle Gouge

  184. FINISH the FOOT of a TURNED BOWL 184. Video
    FINISH the FOOT of a TURNED BOWL

  185. Wood Turned Art :   Carving and Color  (part 2) 185. Video
    Wood Turned Art : Carving and Color (part 2)

  186. TURNING A (WET) WOOD BOWL ON THE LATHE:  PART 2, (INSIDE OF BOWL) 186. Video
    TURNING A (WET) WOOD BOWL ON THE LATHE: PART 2, (INSIDE OF BOWL)

  187. Rough-Turning a Natural edge bowl,     (part 3)  From a log to a bowl with Sam Angelo 187. Video
    Rough-Turning a Natural edge bowl, (part 3) From a log to a bowl with Sam Angelo

  188. Step-by-step Process for DRYING BOWLS 188. Video
    Step-by-step Process for DRYING BOWLS

  189. OFF-CENTER FACEPLATE TURNING-WOOD LATHE 189. Video
    OFF-CENTER FACEPLATE TURNING-WOOD LATHE

  190. Woodturning: oil-based finishes 190. Video
    Woodturning: oil-based finishes

  191. Crazy Burl Bowl Stand 191. Video
    Crazy Burl Bowl Stand

  192. Shop-built outboard Wood Lathe tool rest 192. Video
    Shop-built outboard Wood Lathe tool rest

  193. How Best to Use a Small Olive Log: Woodturning 193. Video
    How Best to Use a Small Olive Log: Woodturning

  194. TURNING AN ICICLE FOR AN ORNAMENT 194. Video
    TURNING AN ICICLE FOR AN ORNAMENT

  195. Fundamentals #7  Forming a Dovetail spigot for your scroll chuck 195. Video
    Fundamentals #7 Forming a Dovetail spigot for your scroll chuck

  196. Woodturning: Sanding a project on the Lathe 196. Video
    Woodturning: Sanding a project on the Lathe

  197. Turning a Laminated Spin Top  by Sam Angelo 197. Video
    Turning a Laminated Spin Top by Sam Angelo

  198. Turning a Cherry Bowl from Seasoned Wood 198. Video
    Turning a Cherry Bowl from Seasoned Wood

  199. Turning Manzanita 199. Video
    Turning Manzanita

  200. Mammoth Quick DRAW: 2014 (Turning a Finial) 200. Video
    Mammoth Quick DRAW: 2014 (Turning a Finial)

  201. RING STAND FOR THE WIFE:   woodturning with Sam Angelo 201. Video
    RING STAND FOR THE WIFE: woodturning with Sam Angelo

  202. Pen Turning with the Robert Sorby Micro gouge 202. Video
    Pen Turning with the Robert Sorby Micro gouge

  203. Shop Built, Floor-Mount Tool rest:  (video Remake) Sam Angelo woodturning 203. Video
    Shop Built, Floor-Mount Tool rest: (video Remake) Sam Angelo woodturning

  204. WOODTURNING:  TURNING A TOP on the LATHE  WITH TEXTURE 204. Video
    WOODTURNING: TURNING A TOP on the LATHE WITH TEXTURE

  205. Oneway 1224 Wood Lathe--- Unboxing,   Sam Angelo 205. Video
    Oneway 1224 Wood Lathe--- Unboxing, Sam Angelo

  206. Sharpening A Point Tool:    Woodturning 206. Video
    Sharpening A Point Tool: Woodturning

  207. Turning a Spatula for the Kitchen:  Woodturning by Sam Angelo 207. Video
    Turning a Spatula for the Kitchen: Woodturning by Sam Angelo

  208. Drying a Bowl in the Microwave 208. Video
    Drying a Bowl in the Microwave

  209. Tung Oil Finish: off the lathe  (remake) 209. Video
    Tung Oil Finish: off the lathe (remake)

  210. Blending Embellishments 210. Playlist
    Blending Embellishments

  211. Casting resin 211. Playlist
    Casting resin

  212. Sanding 212. Playlist
    Sanding

  213. Stabilizing and Casting (and coloring) 213. Playlist
    Stabilizing and Casting (and coloring)

  214. Spheres 214. Playlist
    Spheres

  215. Drying Wood 215. Playlist
    Drying Wood

  216. From a Log to a Completed Bowl 216. Playlist
    From a Log to a Completed Bowl

  217. Turning Bowls 217. Playlist
    Turning Bowls

  218. Tool selection for Cross-grain Work woodturning  with Sam Angelo 218. Video
    Tool selection for Cross-grain Work woodturning with Sam Angelo

  219. Turning a Cast Resin Tool Handle part 2:  woodturning with Sam Angelo second upload   YT 219. Video
    Turning a Cast Resin Tool Handle part 2: woodturning with Sam Angelo second upload YT

  220. Coring:    Two Burl Bowls: woodturning with Sam Angelo 220. Video
    Coring: Two Burl Bowls: woodturning with Sam Angelo

  221. THREAD CHASING PROJECTS:  YOU CAN MAKE BY HAND CHASING THREADS IN WOOD 221. Video
    THREAD CHASING PROJECTS: YOU CAN MAKE BY HAND CHASING THREADS IN WOOD

  222. How to line up Grain in a threaded,  wood turned Lidded  Box   Sam Angelo 222. Video
    How to line up Grain in a threaded, wood turned Lidded Box Sam Angelo

  223. Put a lid on it:  Woodturning with Sam Angelo 223. Video
    Put a lid on it: Woodturning with Sam Angelo

  224. FUNdamentals of Woodturning #2 Drilling on the Lathe 224. Video
    FUNdamentals of Woodturning #2 Drilling on the Lathe

  225. Sam Makes a Scoop: woodturning 225. Video
    Sam Makes a Scoop: woodturning

  226. Turning a Sphere on the lathe using a Jam Chuck:  by Sam Angelo 226. Video
    Turning a Sphere on the lathe using a Jam Chuck: by Sam Angelo

  227. Reading the Bark on Burl Wood:   woodturning 227. Video
    Reading the Bark on Burl Wood: woodturning

  228. Cast Resin Box (threaded Lid)  Woodturning with Sam Angelo 228. Video
    Cast Resin Box (threaded Lid) Woodturning with Sam Angelo

  229. Resin and Maple Burl Lidded Box      by Sam Angelo 229. Video
    Resin and Maple Burl Lidded Box by Sam Angelo

  230. Birdhouse Ornament 2015,    Woodturning by Sam Angelo 230. Video
    Birdhouse Ornament 2015, Woodturning by Sam Angelo

  231. TURNING a TOOTHPICK BOX 231. Video
    TURNING a TOOTHPICK BOX

  232. Turning Salt and Pepper cellers 232. Video
    Turning Salt and Pepper cellers

  233. Turning at a Safe Speed on the Wood Lathe   Sam Angelo 233. Video
    Turning at a Safe Speed on the Wood Lathe Sam Angelo

  234. Turning a Honey Dipper----  One sweet project 234. Video
    Turning a Honey Dipper---- One sweet project

  235. Small End grain Bowl: practice 235. Video
    Small End grain Bowl: practice

  236. TOOL REST HEIGHT and POSITION: Woodturning 236. Video
    TOOL REST HEIGHT and POSITION: Woodturning

  237. Rough Turning a Bowl -starting with a screw chuck 237. Video
    Rough Turning a Bowl -starting with a screw chuck

  238. BUFFING:  Woodturning with Sam Angelo 238. Video
    BUFFING: Woodturning with Sam Angelo

  239. Making Money From Woodturning 239. Video
    Making Money From Woodturning

  240. ALLEN WRENCH HOLLOWING TOOL:   woodturning 240. Video
    ALLEN WRENCH HOLLOWING TOOL: woodturning

  241. Decorating a Bowl: Woodturning by Sam 241. Video
    Decorating a Bowl: Woodturning by Sam

  242. Turning a tiny Top with a BIG skew chisel    by Sam Angelo 242. Video
    Turning a tiny Top with a BIG skew chisel by Sam Angelo

  243. WOODTURNING AND COLORING WOOD ART 243. Video
    WOODTURNING AND COLORING WOOD ART

  244. Banksia Seed Pod Inlay Project WOODTURNING  with  Sam Angelo 244. Video
    Banksia Seed Pod Inlay Project WOODTURNING with Sam Angelo

  245. Tool Section for spindle Work:  RE-make woodturning with  Sam Angelo 245. Video
    Tool Section for spindle Work: RE-make woodturning with Sam Angelo

  246. Cast Resin Tool Handle .....the casting  (PART 1)  woodturning with Sam Angelo 246. Video
    Cast Resin Tool Handle .....the casting (PART 1) woodturning with Sam Angelo

  247. Turning A LIDDED BURL BOX 247. Video
    Turning A LIDDED BURL BOX

  248. Getting Started in Woodturning with Sam Angelo 248. Video
    Getting Started in Woodturning with Sam Angelo

  249. Turning A cross-grain Honey Locust Pot  with Sam Angelo 249. Video
    Turning A cross-grain Honey Locust Pot with Sam Angelo

  250. Buffing Lacquer on Lathe-turned Art 250. Video
    Buffing Lacquer on Lathe-turned Art

  251. To SCRAPE OR CUT RESIN?  woodturning with  Sam Angelo 251. Video
    To SCRAPE OR CUT RESIN? woodturning with Sam Angelo

  252. Stabilizing a Large Burl:  woodturning with Sam angelo 252. Video
    Stabilizing a Large Burl: woodturning with Sam angelo

  253. Dealing with Mold in Wooden Bowls:    woodturning with Sam Angelo 253. Video
    Dealing with Mold in Wooden Bowls: woodturning with Sam Angelo

  254. WET SANDING ON THE WOOD LATHE 254. Video
    WET SANDING ON THE WOOD LATHE

  255. Making a Point Tool with Sam Angelo 255. Video
    Making a Point Tool with Sam Angelo

  256. Turning a One-Piece wooden Yo Yo 256. Video
    Turning a One-Piece wooden Yo Yo

  257. CHRISTMAS TREE ORNAMENT: Woodturning 257. Video
    CHRISTMAS TREE ORNAMENT: Woodturning

  258. wyomingwoodturner 258. Video
    wyomingwoodturner

  259. Bandsaw videos 259. Playlist
    Bandsaw videos

  260. Kids and Woodturning:   wyomingwoodturner and granddaughters 260. Video
    Kids and Woodturning: wyomingwoodturner and granddaughters

  261. FUNdamentals of woodturning: #1 The faceplate 261. Video
    FUNdamentals of woodturning: #1 The faceplate

  262. Utah Woodturning Symposium 2018 262. Video
    Utah Woodturning Symposium 2018

  263. 2015 Christmas Ornament Challenge  Sam Angelo 263. Video
    2015 Christmas Ornament Challenge Sam Angelo

  264. Hand turned finial (Christmas ornament) 264. Video
    Hand turned finial (Christmas ornament)

  265. Bark Edge  Birdhouse Ornament    by  Sam Angelo 265. Video
    Bark Edge Birdhouse Ornament by Sam Angelo

  266. Stabilizing AND coloring a pen blank with Sam Angelo the Wyomingwoodturner 266. Video
    Stabilizing AND coloring a pen blank with Sam Angelo the Wyomingwoodturner

  267. Sharpening  a Bowl gouge with Swept-back Wings:   Woodturning and Sharpening 267. Video
    Sharpening a Bowl gouge with Swept-back Wings: Woodturning and Sharpening

  268. Casting vs Stabilizing: What\'s the Difference?  Sam Angelo 268. Video
    Casting vs Stabilizing: What's the Difference? Sam Angelo

  269. Negative Rake Parting tools    Sam Angelo, wyomingwoodturner 269. Video
    Negative Rake Parting tools Sam Angelo, wyomingwoodturner

  270. Embellishments that effect pricing on turned art,  Sam Angelo 270. Video
    Embellishments that effect pricing on turned art, Sam Angelo

  271. Moving Forward----Sam Angelo,  woodturning 271. Video
    Moving Forward----Sam Angelo, woodturning

  272. A simple approach for Pricing your Art:  woodturning with Sam Angelo 272. Video
    A simple approach for Pricing your Art: woodturning with Sam Angelo

  273. Hand-turned Christmas Ornament 273. Video
    Hand-turned Christmas Ornament

  274. Eva, Sofia, and Grace help with a Q & A       wyomingwoodturner 274. Video
    Eva, Sofia, and Grace help with a Q & A wyomingwoodturner

  275. Lidded Box with Matching bottom:  Woodturning with Sam Angelo 275. Video
    Lidded Box with Matching bottom: Woodturning with Sam Angelo

  276. Your Cheating Heart-Hollow form Part I 276. Video
    Your Cheating Heart-Hollow form Part I

  277. Quick Tip TUESDAY:  Wet sanding on the wood lathe with Sam Angelo 277. Video
    Quick Tip TUESDAY: Wet sanding on the wood lathe with Sam Angelo

  278. Roughing Cut for Bowl turning:   wyomingwoodturner 278. Video
    Roughing Cut for Bowl turning: wyomingwoodturner

  279. THREAD CHASING :  HAND CHASED MALE THREADS IN WOOD PART 1 279. Video
    THREAD CHASING : HAND CHASED MALE THREADS IN WOOD PART 1

  280. Segmented Sphere:  The Glue-up,   woodturning (part 1) 280. Video
    Segmented Sphere: The Glue-up, woodturning (part 1)

  281. Turning a wooden Sphere on the Lathe 281. Video
    Turning a wooden Sphere on the Lathe

  282. Unboxing - - Thompson 5/8\ 282. Video
    Unboxing - - Thompson 5/8" Spindle gouge, by Sam Angelo

  283. Log holder for Milling Wood with a Chainsaw  Sam Angelo, wyomingwoodturner 283. Video
    Log holder for Milling Wood with a Chainsaw Sam Angelo, wyomingwoodturner

  284. 10 woodturning Questions with Sam Angelo 284. Video
    10 woodturning Questions with Sam Angelo

  285. Sharpening the Parting Tool: woodturning with Sam Angelo 285. Video
    Sharpening the Parting Tool: woodturning with Sam Angelo

  286. Applying SHELLAC ON THE WOOD LATHE 286. Video
    Applying SHELLAC ON THE WOOD LATHE

  287. Burning WOOD-turnings 287. Video
    Burning WOOD-turnings

  288. Turning a Stainless Steel Bottle Stopper  with Sam Angelo 288. Video
    Turning a Stainless Steel Bottle Stopper with Sam Angelo

  289. Truing up a Rough Turned Hollow Form: woodturning with Sam Angelo 289. Video
    Truing up a Rough Turned Hollow Form: woodturning with Sam Angelo

  290. Negative Rake scraper: woodturning 290. Video
    Negative Rake scraper: woodturning

  291. TURQUOISE Stone INLAY  for Wood Projects 291. Video
    TURQUOISE Stone INLAY for Wood Projects

  292. Sharpening a Bowl Gouge with a traditional Grind:   woodturning with Sam 292. Video
    Sharpening a Bowl Gouge with a traditional Grind: woodturning with Sam

  293. Sharpening a Skew Chisel Freehand:   woodturning 293. Video
    Sharpening a Skew Chisel Freehand: woodturning

  294. Selecting a Wood Lathe 294. Video
    Selecting a Wood Lathe

  295. Cast Resin Bowl with Alumilite-Clear-Slow...Sam Angelo 295. Video
    Cast Resin Bowl with Alumilite-Clear-Slow...Sam Angelo

  296. Update video  with Sam Angelo 296. Video
    Update video with Sam Angelo

  297. Notes from the wyomingwoodturner 297. Playlist
    Notes from the wyomingwoodturner

  298. Turning what you cannot see!  Woodturning with Sam Angelo 298. Video
    Turning what you cannot see! Woodturning with Sam Angelo

  299. Notes from the Wyomingwoodturner Nov 3,  2017 Sam Angelo 299. Video
    Notes from the Wyomingwoodturner Nov 3, 2017 Sam Angelo

  300. Coloring stabilized pen blanks with Sam Angelo  the WYOMINGWOODTURNER 300. Video
    Coloring stabilized pen blanks with Sam Angelo the WYOMINGWOODTURNER

  301. Notes From the Wyomingwoodturner  February 2018 with Sam Angelo 301. Video
    Notes From the Wyomingwoodturner February 2018 with Sam Angelo

  302. Turning an End Grain, Honey Locust  Pot     with Sam Angelo 302. Video
    Turning an End Grain, Honey Locust Pot with Sam Angelo

  303. Shop-Made Depth/thickness Gauge for Bowls and Hollow forms: by Sam Angelo 303. Video
    Shop-Made Depth/thickness Gauge for Bowls and Hollow forms: by Sam Angelo

  304. Spindle Tools for Woodturning: cutting and sharpening  by Sam Angelo 304. Video
    Spindle Tools for Woodturning: cutting and sharpening by Sam Angelo

  305. Turned Plate with Off-Center Chuck   with Sam Angelo   wyomingwoodturner 305. Video
    Turned Plate with Off-Center Chuck with Sam Angelo wyomingwoodturner

  306. Thread Chasing Magic  Sam Angelo   wyomingwoodturner 306. Video
    Thread Chasing Magic Sam Angelo wyomingwoodturner

  307. Giant Nutcracker by Sam Angelo Wyomingwoodturner 2017 307. Video
    Giant Nutcracker by Sam Angelo Wyomingwoodturner 2017

  308. Milling logs into bowl blanks using a Chainsaw:  Sam Angelo the WYOMINGWOODTURNER 308. Video
    Milling logs into bowl blanks using a Chainsaw: Sam Angelo the WYOMINGWOODTURNER

  309. Long stem Goblet  by Sam Angelo  the Wyomingwoodturner 309. Video
    Long stem Goblet by Sam Angelo the Wyomingwoodturner

  310. Current work......  Sam Angelo-wyomingwoodturner May 5,  2017 310. Video
    Current work...... Sam Angelo-wyomingwoodturner May 5, 2017

  311. Turning Over a New Leaf...by Cheryle Angelo  (wyomingwoodturner) 311. Video
    Turning Over a New Leaf...by Cheryle Angelo (wyomingwoodturner)

  312. 10000 Subscribers..... on Wyomingwoodturner 312. Video
    10000 Subscribers..... on Wyomingwoodturner

  313. Turning a Burl Cap       Woodturning with Sam  Angelo 313. Video
    Turning a Burl Cap Woodturning with Sam Angelo

  314. A  simple Thread Chasing Exercise with Eva & Sofia--wyomingwoodturner 314. Video
    A simple Thread Chasing Exercise with Eva & Sofia--wyomingwoodturner

  315. Coloring a Box Elder Pot with Cheryle: the wyomingwoodturner 315. Video
    Coloring a Box Elder Pot with Cheryle: the wyomingwoodturner

  316. Notes from the Wyomingwoodturner  Oct  23,  2017    Sam Angelo 316. Video
    Notes from the Wyomingwoodturner Oct 23, 2017 Sam Angelo

  317. Notes from the Wyomingwoodturner, March 2018:  Sam is Moving? 317. Video
    Notes from the Wyomingwoodturner, March 2018: Sam is Moving?

  318. Notes from the Wyomingwoodturner:  9.24.17    with Sam Angelo 318. Video
    Notes from the Wyomingwoodturner: 9.24.17 with Sam Angelo

  319. Quick Tip Tuesday Sept 11, 2017: Sam Angelo, wyomingwoodturner 319. Video
    Quick Tip Tuesday Sept 11, 2017: Sam Angelo, wyomingwoodturner

  320. 100th video:  the wyomingwoodturner-says thanks 320. Video
    100th video: the wyomingwoodturner-says thanks

  321. Notes From the wyomingwoodturner    December 2017  Sam Angelo 321. Video
    Notes From the wyomingwoodturner December 2017 Sam Angelo

  322. Notes from the Wyomingwoodturner- October 9th  2017-Sam Angelo 322. Video
    Notes from the Wyomingwoodturner- October 9th 2017-Sam Angelo

  323. Bell Ornament for Christmas----  by Wyomingwoodturner 323. Video
    Bell Ornament for Christmas---- by Wyomingwoodturner

  324. Reviewing the Hollowing Tool STABILIZER: wyomingwoodturner 324. Video
    Reviewing the Hollowing Tool STABILIZER: wyomingwoodturner

  325. Dealing with Moisture in Woodturning projects 325. Video
    Dealing with Moisture in Woodturning projects

  326. A Wyomingwoodturner COWBOY HAT  by Sam Angelo 326. Video
    A Wyomingwoodturner COWBOY HAT by Sam Angelo

  327. Sam Angelo slows down a bit to regroup  ---- wyomingwoodturner 327. Video
    Sam Angelo slows down a bit to regroup ---- wyomingwoodturner

  328. NOTES FROM THE WYOMING WOODTURNER  OCT 2  2017 328. Video
    NOTES FROM THE WYOMING WOODTURNER OCT 2 2017

  329. Off-Center Screw Driver Handle:  Sam Angelo 329. Video
    Off-Center Screw Driver Handle: Sam Angelo

  330. Demonstrating the Hollowing Tool STABILIZER: wyomingwoodturner 330. Video
    Demonstrating the Hollowing Tool STABILIZER: wyomingwoodturner

  331. Making a Bead for Beads of Courage with Sam Angelo  wyomingwoodturner 331. Video
    Making a Bead for Beads of Courage with Sam Angelo wyomingwoodturner

  332. Add-on tables for Delta Bandsaw and Drill press:  Sam Angelo wyomingwoodturner 332. Video
    Add-on tables for Delta Bandsaw and Drill press: Sam Angelo wyomingwoodturner

  333. Notes from the Wyomingwoodturner  December 1, 2017  Sam Angelo 333. Video
    Notes from the Wyomingwoodturner December 1, 2017 Sam Angelo

  334. Wyomingwoodturner Analytics 334. Video
    Wyomingwoodturner Analytics

  335. METAL REACTIVE PAINTS:  Review, and a comment 335. Video
    METAL REACTIVE PAINTS: Review, and a comment

  336. COMMENTS and Questions  OCT 2016 Sam Angelo, wyomingwoodturner 336. Video
    COMMENTS and Questions OCT 2016 Sam Angelo, wyomingwoodturner

  337. Rough Turning a Birch BOWL,   part 2 Sam Angelo wyomingwoodturner 337. Video
    Rough Turning a Birch BOWL, part 2 Sam Angelo wyomingwoodturner

  338. Festival of Trees-2017  wyomingwoodturner 338. Video
    Festival of Trees-2017 wyomingwoodturner

  339. Scroll Chucks and Jaws for Woodturning by Sam Angelo 339. Video
    Scroll Chucks and Jaws for Woodturning by Sam Angelo

  340. Notes From the Wyomingwoodturner    May 2018  with Sam Angelo 340. Video
    Notes From the Wyomingwoodturner May 2018 with Sam Angelo

  341. Turned Morse Taper Drill Bit Chuck:  Sam Angelo,   wyomingwoodturner 341. Video
    Turned Morse Taper Drill Bit Chuck: Sam Angelo, wyomingwoodturner

  342. Measuring the Volume of a Burial Urn: woodturning 342. Video
    Measuring the Volume of a Burial Urn: woodturning

  343. Woodturning Design and the Weed pot 343. Video
    Woodturning Design and the Weed pot

  344. Turning with a  Skew chisel on square stock    with Sam Angelo the Wyomingwoodturner 344. Video
    Turning with a Skew chisel on square stock with Sam Angelo the Wyomingwoodturner

  345. Clarks Food Safe Cutting Board products   with Sam Angelo wyomingwoodturner 345. Video
    Clarks Food Safe Cutting Board products with Sam Angelo wyomingwoodturner

  346. Turning a Decorative Inlay for a Lidded Box--Sam Angelo (wyomingwoodturner) 346. Video
    Turning a Decorative Inlay for a Lidded Box--Sam Angelo (wyomingwoodturner)

  347. My accident:  Sam Angelo 347. Video
    My accident: Sam Angelo

  348. Sanding on the Wood Lathe with Sam Angelo-the wyomingwoodturner 348. Video
    Sanding on the Wood Lathe with Sam Angelo-the wyomingwoodturner

  349. Embellished Bowl----Part 1 the outside  with Sam Angelo wyomingwoodturner 349. Video
    Embellished Bowl----Part 1 the outside with Sam Angelo wyomingwoodturner

  350. Seal and Store Small  Pieces of Wood Sam Angelo the Wyomingwoodturner 350. Video
    Seal and Store Small Pieces of Wood Sam Angelo the Wyomingwoodturner

  351. Lathe-turned Viking Bowl:  woodturning by Sam Angelo  wyomingwoodturner 351. Video
    Lathe-turned Viking Bowl: woodturning by Sam Angelo wyomingwoodturner

  352. Notes from the WyomingWoodturner  AUGUST 2018 with Sam Angelo 352. Video
    Notes from the WyomingWoodturner AUGUST 2018 with Sam Angelo

  353. Texturing  and Coloring Wood with Sam Angelo  wyomingwoodturner 353. Video
    Texturing and Coloring Wood with Sam Angelo wyomingwoodturner

  354. Draw Bar Basics for the wood Lathe-- with Sam Angelo the Wyomingwoodturner 354. Video
    Draw Bar Basics for the wood Lathe-- with Sam Angelo the Wyomingwoodturner

  355. DETAIL GOUGE---WoodTurning Fundamentals   Sam Angelo 355. Video
    DETAIL GOUGE---WoodTurning Fundamentals Sam Angelo

  356. Applying Metal Leaf: a simple approach with Sam Angelo - wyomingwoodturner 356. Video
    Applying Metal Leaf: a simple approach with Sam Angelo - wyomingwoodturner

  357. Skew Chisel practice   LONG Version  with the Wyomingwoodturner 357. Video
    Skew Chisel practice LONG Version with the Wyomingwoodturner

  358. Casting Resin: failure and success-woodturning with Sam angelo 358. Video
    Casting Resin: failure and success-woodturning with Sam angelo

  359. Notes from the Wyomingwoodturner:  July,  2018  with Sam Angelo 359. Video
    Notes from the Wyomingwoodturner: July, 2018 with Sam Angelo

  360. Threaded Box in Alternative Ivory-- Woodturning with Sam Angelo the Wyomingwoodturner 360. Video
    Threaded Box in Alternative Ivory-- Woodturning with Sam Angelo the Wyomingwoodturner

  361. Lathe-Turned Apple Wood Shop Mallet with Sam Angelo  the WYOMINGWOODTURNER 361. Video
    Lathe-Turned Apple Wood Shop Mallet with Sam Angelo the WYOMINGWOODTURNER

  362. Showcasing the Doughnut Chuck  Sam Angelo (wyomingwoodturner) 362. Video
    Showcasing the Doughnut Chuck Sam Angelo (wyomingwoodturner)

  363. Notes from the Wyomingwoodturner  with Sam Angelo   June 2018 363. Video
    Notes from the Wyomingwoodturner with Sam Angelo June 2018

  364. The First Cut is....Important when Milling a Burl: wyomingwoodturner 364. Video
    The First Cut is....Important when Milling a Burl: wyomingwoodturner

  365. Myrtle Wood Wall Hanger (part 1)  by Sam Angelo  the wyomingwoodturner 365. Video
    Myrtle Wood Wall Hanger (part 1) by Sam Angelo the wyomingwoodturner

  366. Simple Chucking Method for the wood lathe: Quick Tip Tuesday-wyomingwoodturner 366. Video
    Simple Chucking Method for the wood lathe: Quick Tip Tuesday-wyomingwoodturner

  367. Longworth Chuck Type 2—Unboxing and Review by Sam Angelo 367. Video
    Longworth Chuck Type 2—Unboxing and Review by Sam Angelo

  368. Stabilizing a Cored Bowl   Sam Angelo the WYOMINGWOODTURNER 368. Video
    Stabilizing a Cored Bowl Sam Angelo the WYOMINGWOODTURNER

  369. Turning a Cast Resin Bowl --  Sam Angelo wyomingwoodturner 369. Video
    Turning a Cast Resin Bowl -- Sam Angelo wyomingwoodturner

  370. NOTES from the  Wyomingwoodturner  October 2018  Sam Angelo 370. Video
    NOTES from the Wyomingwoodturner October 2018 Sam Angelo

  371. Embellished Bowl---Part 2, the Inside-- Sam Angelo  wyomingwoodturner 371. Video
    Embellished Bowl---Part 2, the Inside-- Sam Angelo wyomingwoodturner

  372. Cast Resin Bowl with a Center Core:  \ 372. Video
    Cast Resin Bowl with a Center Core: "The TURNING" Part 2 Sam Angelo wyomingwoodturner

  373. Myrtle Wood Wall Hanger (part 2)  by Sam Angelo  the wyomingwoodturner 373. Video
    Myrtle Wood Wall Hanger (part 2) by Sam Angelo the wyomingwoodturner

  374. Applying Metal Reactive Paint with Sam Angelo-wyomingwoodturner 374. Video
    Applying Metal Reactive Paint with Sam Angelo-wyomingwoodturner

  375. Wood Lathe Safety:  WYOMINGWOODTURNER 375. Video
    Wood Lathe Safety: WYOMINGWOODTURNER

  376. Practicing with the Skew Chisel Sam Angelo - the Wyomingwoodturner 376. Video
    Practicing with the Skew Chisel Sam Angelo - the Wyomingwoodturner

  377. Turning a Cast Resin Sphere    Sam Angelo, wyomingwoodturner 377. Video
    Turning a Cast Resin Sphere Sam Angelo, wyomingwoodturner

  378. Turning a Stabilized lidded box with a Threaded fitment:  Sam Angelo Wyomingwoodturner 378. Video
    Turning a Stabilized lidded box with a Threaded fitment: Sam Angelo Wyomingwoodturner

  379. Turning a Decorative,  Hollow Tube     with  Sam Angelo 379. Video
    Turning a Decorative, Hollow Tube with Sam Angelo

  380. Natural Edge, Wet-turned  test bowl,  Sam Angelo 380. Video
    Natural Edge, Wet-turned test bowl, Sam Angelo

  381. Blending Embellishments/Decorative Display piece by Sam Angelo 381. Video
    Blending Embellishments/Decorative Display piece by Sam Angelo

  382. Turning a Segmented Sphere   (part 2) Woodturning by Sam Angelo 382. Video
    Turning a Segmented Sphere (part 2) Woodturning by Sam Angelo

  383. Sanding tip from the AAW in KC ,   Sam Angelo  wyomingwoodturner 383. Video
    Sanding tip from the AAW in KC , Sam Angelo wyomingwoodturner

  384. BoxWood Box for Grace 384. Video
    BoxWood Box for Grace

  385. Carter and Son Tools: REVIEW by Sam Angelo 385. Video
    Carter and Son Tools: REVIEW by Sam Angelo

  386. Natural Edge Holly Bowl  woodturning with Sam Angelo 386. Video
    Natural Edge Holly Bowl woodturning with Sam Angelo

  387. January 2018 Notes From The Wyomingwoodturner  Sam Angelo 387. Video
    January 2018 Notes From The Wyomingwoodturner Sam Angelo

  388. Cast Resin Needle Case --Threaded:  Sam Angelo wyomingwoodturner 388. Video
    Cast Resin Needle Case --Threaded: Sam Angelo wyomingwoodturner

  389. Elements of a Successful Video or Live Demonstration with  Sam Angelo 389. Video
    Elements of a Successful Video or Live Demonstration with Sam Angelo

  390. Carter & Son tools revisited: Handles, Box Scraper, & Parting tool  Sam Angelo 390. Video
    Carter & Son tools revisited: Handles, Box Scraper, & Parting tool Sam Angelo

  391. Drying Rough-Turned Bowls-wyomingwoodturner 391. Video
    Drying Rough-Turned Bowls-wyomingwoodturner

  392. Cast Resin Bowl with Center Core:  \ 392. Video
    Cast Resin Bowl with Center Core: "the casting" Part 1 Sam Angelo wyomingwoodturner